Hook Daiichi 2546 (or Gamakatsu SC15), 2 (down to 6)
Thread Bonefish pink (or to match) Danville 210 flat waxed
Materials
Cactus chenille, medium Orange cactus chenille medium (few wraps)
Crustacean eyes (Mason hard mono) - (1 pair (optional))
Arctic fox tail Red/tan material (1 clump)
Grizzly flutter legs (antennae) Clear/black barred hackle (1 pair)
Crazy legs / Sili legs Clear-orange rubber legs (1 pair)
Palmer chenille, medium Tan chenille (2 in)
Krystal hackle, medium - (1 length)
EP tarantula brush, 1/2 in White uni stretch (1 length)
Bead chain or lead eyes Gold dumbbell eyes (1 pair)
Mason hard mono (weed guard) 40 lb (1 piece)
Loon UV Thin Clear uv resin (-)
How to tie it
Lay a thread base back to just past the straight of the hook at the barb.
Tie in orange medium cactus chenille and take four or five wraps for an egg-sac suggestion, then trim.
Tie in the crustacean eyes on top so they sit separated and splayed (optional).
Tie in a clump of arctic fox as the tail, pulling the butts up and trimming for a ramp; cover with thread.
Tie in one pair of grizzly flutter legs as antennae just longer than the tail, then a pair of clear-orange crazy legs on the sides of the tail, trimmed a touch shorter.
Tie in tan medium Palmer chenille on top of the leg wraps and wrap it forward over the mound to bury the tie-ins.
Tie in medium Krystal hackle (dot with black bars), palmer five to seven turns, and sweep the fibres back.
Advance the thread and tie in the gold bead-chain (or lead) eyes on top with figure-eight wraps, leaving room for a weed guard; secure with a drop of Loon UV Thin or hardhead.
Move the thread in front of the crystal hackle and tie in the white EP tarantula brush, palmer it forward around the eyes, and sweep back.
Tie in a Mason hard-mono weed guard (flattened, bent tip) in front of the eyes, whip finish behind it, and coat the head with Loon UV Thin, then cure.