Add four or five wraps of wire at the bend, push it flush, and lock it with UV resin; then add seven or eight wraps of wire mid-shank for a jigging action and cover with UV resin.
Start the GSP thread, build a small bump at the hook point to stop materials sliding, then tie in a sparse silver Kanekalon/SF tail on top and bottom, tapered, with the top longer than the bottom (about 55/45); add a few strands of silver Polar Flash and bronze/mirage Angelina, blending and tapering.
Glue the tail wraps, then dub a little pearl Glister Sparkle Dub over the wire to cover the thread.
Form a dubbing loop, load it with a small amount of yellow strung fuzzy fibre, spin it into a brush, and wrap it forward to create a yellow band; brush it out and blend.
Repeat with an orange fuzzy-fibre dubbing loop just ahead of the yellow to build the fire-tiger hot-spot color blend.
Tie in Nayat over the top (and belly) in mackerel green/silver/grey/white to build the back, profile, and taper.
Whip finish, add an 8 mm tape eye to each side, and coat the head with UV resin or a couple of coats of Liquid Fusion.