Tungsten bead Black nickel tungsten bead (5/32 inch)
Marabou Black marabou (1 bunch (tail))
Magnum Flashabou, holographic Black magnum flashabou, holographic (2 strands (body))
Brassie wire Black brassie wire (1 length (rib and dubbing brush core))
Spirit River UV2 Seal-X dubbing Black spirit river uv2 seal-x dubbing (Very sparse (veil))
How to tie it
Seat the bead on the jig hook and dress the shank.
Tie in a black marabou tail at least one shank length, a touch longer is fine on a jig, keeping it clean and breathable; no flash mixed into the tail.
Tie in two strands of black holographic Magnum Flashabou on the side, then the black brassie wire; half-hitch.
Wrap the Flashabou forward to cover the body; tie it down.
Reverse-wrap the brassie wire over the body for durability, and don't cut it.
Lay a very sparse amount of black UV2 Seal-X across the thread (half of what looks right is plenty) and spin the remaining brassie wire into a tight dubbing brush; brush it out well.
Wrap the brush forward, preening the UV fibers back with each turn so they veil the flash body; pull the wire in tight behind the bead and tie off under heavy thread pressure.
Whip finish behind the bead and trim.
Pull all the fibers out with a bodkin, taking your time, then brush them back over the body.