Start the thread and build an even base back to just short of the bend so the body material won't slip.
Pull a couple of chunks of fibers off the two-tone rabbit flesh strip, keeping the tail as long as possible with both white and pink showing; tie in at the bend with a wrap behind the fibers as well.
Run the thread forward, leaving a couple of hook-eye lengths of space for the wing and head.
Tie in a long piece of gold flat braid and wrap it up the shank in touching turns, covering the whole body; tie off.
Pull off a dozen to 15 strands of baitfish emulator flash and tie in on top as a wing reaching just to the back of the hook.
Snip out any wayward strands, then build a neat orange thread head.
Whip finish and coat the head with head cement or UV resin.